Gnome
debian 拉伸和藍牙耳機
一旦連接了耳機，就無法真正更改為 A2DP。音質真的很差。
. 進行了一些更改，a2dp 僅在重新啟動藍牙後才起作用，但在重新啟動後它不起作用
按照指示從
https://sandalov.org/blog/2146/ 和https://askubuntu.com/questions/319871/bluetooth-speaker-preferred-mode-high-fidelity-playback-a2dp-is-not-getting
修改了兩個文件
第一個文件 /etc/bluetooth/main.conf 將最後三行添加到原始文件
[General] # Default adapter name # Defaults to 'BlueZ X.YZ' #Name = BlueZ # Default device class. Only the major and minor device class bits are # considered. Defaults to '0x000000'. #Class = 0x000100 # How long to stay in discoverable mode before going back to non-discoverable # The value is in seconds. Default is 180, i.e. 3 minutes. # 0 = disable timer, i.e. stay discoverable forever #DiscoverableTimeout = 0 # How long to stay in pairable mode before going back to non-discoverable # The value is in seconds. Default is 0. # 0 = disable timer, i.e. stay pairable forever #PairableTimeout = 0 # Automatic connection for bonded devices driven by platform/user events. # If a platform plugin uses this mechanism, automatic connections will be # enabled during the interval defined below. Initially, this feature # intends to be used to establish connections to ATT channels. Default is 60. #AutoConnectTimeout = 60 # Use vendor id source (assigner), vendor, product and version information for # DID profile support. The values are separated by ":" and assigner, VID, PID # and version. # Possible vendor id source values: bluetooth, usb (defaults to usb) #DeviceID = bluetooth:1234:5678:abcd # Do reverse service discovery for previously unknown devices that connect to # us. This option is really only needed for qualification since the BITE tester # doesn't like us doing reverse SDP for some test cases (though there could in # theory be other useful purposes for this too). Defaults to 'true'. #ReverseServiceDiscovery = true # Enable name resolving after inquiry. Set it to 'false' if you don't need # remote devices name and want shorter discovery cycle. Defaults to 'true'. #NameResolving = true # Enable runtime persistency of debug link keys. Default is false which # makes debug link keys valid only for the duration of the connection # that they were created for. #DebugKeys = false # Restricts all controllers to the specified transport. Default value # is "dual", i.e. both BR/EDR and LE enabled (when supported by the HW). # Possible values: "dual", "bredr", "le" #ControllerMode = dual # Enables Multi Profile Specification support. This allows to specify if # system supports only Multiple Profiles Single Device (MPSD) configuration # or both Multiple Profiles Single Device (MPSD) and Multiple Profiles Multiple # Devices (MPMD) configurations. # Possible values: "off", "single", "multiple" #MultiProfile = off # Permanently enables the Fast Connectable setting for adapters that # support it. When enabled other devices can connect faster to us, # however the tradeoff is increased power consumptions. This feature # will fully work only on kernel version 4.1 and newer. Defaults to # 'false'. #FastConnectable = false # Default privacy setting. # Enables use of private address. # Possible values: "off", "device", "network" # "network" option not supported currently # Defaults to "off" # Privacy = off [Policy] # # The ReconnectUUIDs defines the set of remote services that should try # to be reconnected to in case of a link loss (link supervision # timeout). The policy plugin should contain a sane set of values by # default, but this list can be overridden here. By setting the list to # empty the reconnection feature gets disabled. #ReconnectUUIDs=00001112-0000-1000-8000-00805f9b34fb,0000111f-0000-1000-8000-00805f9b34fb,0000110a-0000-1000-8000-00805f9b34fb # ReconnectAttempts define the number of attempts to reconnect after a link # lost. Setting the value to 0 disables reconnecting feature. #ReconnectAttempts=7 # ReconnectIntervals define the set of intervals in seconds to use in between # attempts. # If the number of attempts defined in ReconnectAttempts is bigger than the # set of intervals the last interval is repeated until the last attempt. #ReconnectIntervals=1,2,4,8,16,32,64 # AutoEnable defines option to enable all controllers when they are found. # This includes adapters present on start as well as adapters that are plugged # in later on. Defaults to 'false'. AutoEnable=true AutoConnect=true Disable=Headset第二個文件是 /etc/pulse/
#!/usr/bin/pulseaudio -nF # # This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # PulseAudio is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with PulseAudio; if not, see <http://www.gnu.org/licenses/>. # This startup script is used only if PulseAudio is started per-user # (i.e. not in system mode) .fail ### Automatically restore the volume of streams and devices load-module module-device-restore load-module module-stream-restore load-module module-card-restore ### Automatically augment property information from .desktop files ### stored in /usr/share/application load-module module-augment-properties ### Should be after module-*-restore but before module-*-detect load-module module-switch-on-port-available ### Load audio drivers statically ### (it's probably better to not load these drivers manually, but instead ### use module-udev-detect -- see below -- for doing this automatically) #load-module module-alsa-sink #load-module module-alsa-source device=hw:1,0 #load-module module-oss device="/dev/dsp" sink_name=output source_name=input #load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input #load-module module-null-sink #load-module module-pipe-sink ### Automatically load driver modules depending on the hardware available .ifexists module-udev-detect.so load-module module-udev-detect .else ### Use the static hardware detection module (for systems that lack udev support) load-module module-detect .endif ### Automatically connect sink and source if JACK server is present .ifexists module-jackdbus-detect.so .nofail load-module module-jackdbus-detect channels=2 .fail .endif ### Automatically load driver modules for Bluetooth hardware .ifexists module-bluetooth-policy.so load-module module-bluetooth-policy load-module module-switch-on-connect .endif .ifexists module-bluetooth-discover.so load-module module-bluetooth-discover .endif ### Load several protocols .ifexists module-esound-protocol-unix.so load-module module-esound-protocol-unix .endif load-module module-native-protocol-unix ### Network access (may be configured with paprefs, so leave this commented ### here if you plan to use paprefs) #load-module module-esound-protocol-tcp #load-module module-native-protocol-tcp #load-module module-zeroconf-publish ### Load the RTP receiver module (also configured via paprefs, see above) #load-module module-rtp-recv ### Load the RTP sender module (also configured via paprefs, see above) #load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'" #load-module module-rtp-send source=rtp.monitor ### Load additional modules from GConf settings. This can be configured with the paprefs tool. ### Please keep in mind that the modules configured by paprefs might conflict with manually ### loaded modules. .ifexists module-gconf.so .nofail load-module module-gconf .fail .endif ### Automatically restore the default sink/source when changed by the user ### during runtime ### NOTE: This should be loaded as early as possible so that subsequent modules ### that look up the default sink/source get the right value load-module module-default-device-restore ### Automatically move streams to the default sink if the sink they are ### connected to dies, similar for sources load-module module-rescue-streams ### Make sure we always have a sink around, even if it is a null sink. load-module module-always-sink ### Honour intended role device property load-module module-intended-roles ### Automatically suspend sinks/sources that become idle for too long load-module module-suspend-on-idle ### If autoexit on idle is enabled we want to make sure we only quit ### when no local session needs us anymore. .ifexists module-console-kit.so load-module module-console-kit .endif .ifexists module-systemd-login.so load-module module-systemd-login .endif ### Enable positioned event sounds load-module module-position-event-sounds ### Cork music/video streams when a phone stream is active load-module module-role-cork ### Modules to allow autoloading of filters (such as echo cancellation) ### on demand. module-filter-heuristics tries to determine what filters ### make sense, and module-filter-apply does the heavy-lifting of ### loading modules and rerouting streams. load-module module-filter-heuristics load-module module-filter-apply ### Make some devices default #set-default-sink output #set-default-source input製作我的文件
\etc\bluetooth/main.conf
而不是遵循許多與 Debian 無關的指南，也不****是來自官方Debian Wiki；我可以謙虛地建議您遵循**本指南**。
這是：
- 對於 Debian（不是 *buntu）
- 官方指南
- 測試和工作（我直到昨天才遵循指南，並且可以確認資訊確實正確且是最新的）
注意： 我個人使用過：
解決方法 1：在 gdm 中禁用 pulseaudio
從我所有電腦上的 Wiki，從 Jessie 到 Stretch，它一直有效。
根據您連結的 AskUbuntu 問題，該
Disable=Headset行/etc/bluetooth/main.conf應該在[General]文件的部分中，而不是在[Policy]它現在所在的部分中。所以把那條線移到上面寫著的那條線上，[Policy]然後再試一次。