U-Boot
bist 命令的使用需要參考
我有一個嵌入式設備，上面有 bist。在啟動過程中，我可以在 uboot 中停止並進入 bist。當我在
help這裡執行時，我會看到一個命令列表。但是，我無法使用它們，因為關於如何使用它們沒有太多幫助。有人知道如何使用命令嗎？這就是我所說的：
bist > help ? - alias for 'help' autoscr - DEPRECATED - use "source" command instead base - print or set address offset boot - boot default, i.e., run 'bootcmd' check - perform MMC CRC32 check cmp - memory compare coninfo - print console devices and information cp - memory copy crc32 - checksum calculation diag - perform board diagnostics echo - echo args to console go - start application at address 'addr' halt - halt board help - print online help i2c - I2C sub-system idme - idme - Set nv ram variables iminfo - print header information for application image itest - return true/false on integer compare loadb - load binary file over serial line (kermit mode) loads - load S-Record file over serial line loady - load binary file over serial line (ymodem mode) loop - infinite loop on address range loopw - infinite write loop on address range md - memory display mm - memory modify (auto-incrementing address) mmc - MMC sub system mmcinfo - mmcinfo <dev num>-- display MMC info mtest - simple RAM read/write test mw - memory write (fill) nm - memory modify (constant address) ocotp - OCOTP sub system panic - panic halt pass - pass blink pass pattern on LED pmic - pmic - PMIC utility commands printenv- print environment variables reset - Perform RESET of the CPU run - run commands in an environment variable setenv - set environment variables sleep - delay execution for some time source - run script from memory sspi - SPI utility commands version - print monitor version
查看Uboot 手冊，尤其是第 5 節。還應該可以通過 cli 本身顯示其他資訊
help COMMAND